|
|
 |
 
Polymer-Modified, Thin Patching Surface Repair Mortar
Purpose:
F3 is a one-component, dry polymer-modified blend of portland cement, selected aggregates and proprietary admixtures designed for repairs from feather edge to 3" in interior and exterior applications. F3 offers the additional benefit of Ferrolok™, a penetrating corrosion inhibitor.
Uses:
 | Precast concrete products, tilt-up panels, curbs, steps, columns, sidewalks, driveways, concrete walls |
| Refinish old, horizontal, concrete and masonry surfaces |
| Thin resurfacing of spalled, older concrete |
| Fill in pits, voids and defects in concrete and masonry |
|
|
|
|
Packaging
50 lb bags
|
 Physical Properties |
Compressive Strength (ASTM C-109)
|
|
1 DAY |
3 DAYS |
7 DAYS |
28 DAYS |
|
Flowable - A |
2,700 psi |
3,200 psi |
3,500 psi |
3,700 psi |
|
Plastic - B |
3,200 psi |
3,600 psi |
4,000 psi |
4,100 psi | * Note: A = 5.0 qts | B = 4.0 qts
Rate of Set (ASTM C-266)
|
CONSISTENCY |
WORKING TIME |
INITIAL |
FINAL |
|
Flowable - A |
:30 |
:50 |
1:20 |
|
Plastic - B |
:15 |
:35 |
:55 | * Actual times may vary due to application thickness and curing temperatures.
|
 Product Standards & Approvals |
|
| N/A |
03 01 30 CONCRETE REHABILITATION |
|
 Product Downloads |
InformationHow Much Do I Need?
|
 View the Restoration & Repair Products reference chart.
If you experience difficulty opening a document, save it to your local computer before opening it.  The documents above require Adobe Acrobat Reader to view or print.
If you need to download it, click here.
|
