|
|
 |
 
All Weather Epoxy Acrylate Hybrid Anchoring Gel
Purpose:
Gelbond Sub-Zero is a 100% solids, solvent free anchoring gel. Using the latest technology, Gelbond Sub-Zero has been engineered to gun at -15ºF, set up quickly, and attain high early strength.
Uses:
Use in damp or water filled holes or in cold weather conditions.
Suggested Applications:
 | Heavy duty anchoring of rebar, threaded rods and epoxy-coated smooth dowels in concrete, brick or stone masonry |
| Structural bonding of heavy loads |
| Grouting dowels, anchors, rebar, bolts and metal anchors in horizontal, vertical or overhead applications where extremely rapid setting and fast turn-around times are needed. |
| Extreme cold |
| Repair of cracks in concrete or masonry |
| Sealing of ports and cracks for epoxy injection |
|
|
|
|
Packaging
750 ml x 75 ml cartridge
|
 Physical Properties |
|
Test |
Results |
ASTM
SPECIFICATIONS |
|
Mix Ratio (by volume) |
10:1 |
N/A |
|
ASTM C-881 Gel Time |
7.5 minutes |
5 minutes min.
(I, II, IV, V) |
|
ASTM C-882
Bond Strength (2 days) |
2,890 psi |
1,000 psi min. |
|
ASTM C-882
Bond Strength (14 days) |
3,250 psi |
1,500 psi min.
(I, II, IV, V) |
|
ASTM D-570
Absorption |
0.08% |
1.0% max. |
|
ASTM C-881 Consistency |
0 (no flow) |
1/4" flow max. |
|
ASTM D-695
Compressive Strength |
10,540 psi |
10,000 psi (I)
min. |
|
ASTM D-695
Compressive Modulus |
265,000 psi |
200,000 psi (I)
min. |
|
ASTM D-638
% Elongation at Break |
1.321% |
1.0% (I)
min. |
|
ASTM D-648 Heat Deflection |
144ºF (62ºC) |
120ºF (49ºC) |
|
-15ºF (-26ºC) |
8 hours |
36 hours |
|
 Product Standards & Approvals |
|
ASTM C-881 Type I, II*, IV and V*
Grade 3, Class A, B and C |
03 30 00 EPOXY COATINGS |
*Meets all requirments excluding gel time
|
 Product Downloads |
|
 View the Epoxy Adhesive Products reference chart.
If you experience difficulty opening a document, save it to your local computer before opening it.  The documents above require Adobe Acrobat Reader to view or print.
If you need to download it, click here.
|
