The proof of the quality of our products lies in examples of how our products peform on real job applications. Here are just a few of the projects that have relied on US SPEC products to get the job done. Please view the project profile document below each project for detailed information.
PRODUCT(S) USED: Maxcure Resin Clear, GP Grout, Maxi-Bond 500 LV
The contractor contacted US SPEC to solve their problem of loosening handrails during the construction of this 75 million dollar soccer complex.
PRODUCT(S) USED: Dense Top LR, Industraseal
Boulder County wanted a strong, light reflective industrial floor that would resist tough abrasive forces and most vehicular fluids.
PRODUCT(S) USED: Thermal Grout (custom mix)
Four hundred tons of grout was needed to fill the angular space between steel pipe and conduits. Strict standards were required for the grout to withstand the thermal conductivity generated. The grout also needed to be pumped over the 2000 ft. expanse.
PRODUCT(S) USED: Transpatch EXT, Acrylcoat
The entry courtyard of this downtown commercial high rise was in need of resurfacing and the addition of decorative concrete elements was desired.
PRODUCT(S) USED: H2 Coarse, Acrylcoat
The ballpark located in San Diego, CA was in need of large overlays and concrete surface repairs. The innovative design and technological features make the new park an architectural highlight of San Diego.
PRODUCT(S) USED: MS Gunnite SF
The US Army Corps of Engineers sought to prevent further erosion from happening along the cliffs surrounding the area and therefore keep debris from blocking the drainage tunnel leading away from the lake.
PRODUCT(S) USED: Self Leveling Underlayment
The Galleria Corporate Center in Scottsdale, AZ was in need of rehabilitation and transformation to meet the requirements of new corporate tenants. The job entailed turning a regular office into a call center for a major software company.
PRODUCT(S) USED: NA Grout, MP Grout
The project called for a new spillway as the existing spillway had reached a state that did not allow for sufficient control over water flow.
PRODUCT(S) USED: Radiance UV-25, SR50, Polypatch FR, EPM 3000
This project called for the rebuilding of joint systems, crack and spall repairs, grinding and sealing of concrete slabs and other miscellaneous concrete rehabilitation.
